Like all other computer systems, A Mac is prone to serious
problems over the course of time. Macs aren’t immune to software and hardware
problems. A Mac may sometimes not respond to the Power button at all or otherwise, fail to start up correctly. The
first step is to check that your Mac just is responding to its power button or
not. If it’s responding but failing to boot up normally, scroll down to the
Recovery Mode sections. These problems can be analyzed when in the boot process
the system fails. To fix these errors follow the steps given below:-
Run disk utility
If your Mac won’t boot then there could be many issues at
play. The first step on that front is to run disk utility .on a Mac running Mountain
lion, you can run disk utility by booting into
OS X recovery mode.
- Select the Disk Utility Option.
- From their select your hard drive, and click "Verify."
- In case problems pop up, click "Repair Disk.” or click "Repair Permissions" and wait for Disk Utility to scan your hard drive again.
- If Disk Utility finds and repairs some problems, go ahead and reboot. If this doesn't work, you have a lot more problems to look into.
In case,
these steps do not work .then it’s better
to approach a reliable third party support providing company which offers you
quality Apple technical support
services at affordable rates.
Power cycle
In case, Apple Mac is not responding to power buttons and is not charging, despite being plugged in the socket. Expert tech support
number for MacBook
The power cycle takes 20 seconds to complete. So for this
simply:-
- Unplug the battery of your Apple Mac.
- Unplug the Mag Safe power cable.
- Hold the power button of your device for about 10 seconds and while holding the power button, insert the Mag Safe power cable and hold it for another 10 sec.
- Now, release the power button and make a “normal” press as you would normally turn on your computer.
Sometimes rebooting Mac get things work in a correct manner.
If that doesn’t work, then it’s better to call toll-free Mac technical support
number and get optimized solutions in a short span of time.
Reinstall Mountain
lion
Simply boot into
recovery mode and reinstall mountain lion. Now click to install mountain lion and
follow the on screen steps. Reset PRAM to restart PRAM, turn on your Mac and
hold the command+option+p+r keys, and continue holding until the computer
restarts a second time. In some cases,
this reboot doesn’t work then it’s better
to contact reliable technical support
for Apple Mac and get instant support.
In the power PC it’s
about setting the PRAM but in modern Macs the real name is NVRAM. This refers
to the special memory section on your Mac that store’s
data. There are still several other tips and suggestions on the topic of Mac
startup problems .To know more solutions regarding your problems it’s good to
visit the company profile and get optimized solutions.
No comments:
Post a Comment